How To Fix Worn INFINITI Wheel Bearings

Today we’re talking about how to fix worn INFINITI wheel bearings. The wheel bearings are a critical component of your car’s suspension system. They allow your wheels to rotate smoothly and support the weight of your car. Over time, wheel bearings can wear out and cause a variety of problems, including noise, vibration, and uneven tire wear. In this article, I’ll go over how to diagnose and fix worn INFINITI wheel bearings.

Diagnosing the Problem

The first step in fixing worn INFINITI wheel bearings is to diagnose the problem. There are a few common signs of worn wheel bearings, including:

  • Grinding or humming noise coming from the wheels
  • Vibrations in the steering wheel or floorboards
  • Uneven tire wear

If you notice any of these symptoms, it’s important to have your Infiniti’s wheel bearings checked by a mechanic. Driving on worn wheel bearings can cause further damage to your car and even lead to a dangerous situation.

Fixing the Problem

Once you’ve diagnosed the problem with your Infiniti’s wheel bearings, it’s time to fix them. Here’s how to fix worn INFINITI wheel bearings:

Step 1: Remove the Wheel

The first step in fixing worn INFINITI wheel bearings is to remove the wheel. To do this, you’ll need to use a lug wrench to loosen the lug nuts. Then, use a jack to lift the car off the ground. Once the car is lifted, you can remove the lug nuts and take the wheel off.

Step 2: Remove the Brake Caliper and Rotor

Next, you’ll need to remove the brake caliper and rotor. Use a socket wrench to remove the bolts that hold the brake caliper in place. Then, use a pry bar to remove the caliper from the rotor. Once the caliper is removed, you can take the rotor off.

Step 3: Remove the Bearing Assembly

With the rotor removed, you’ll be able to see the bearing assembly. Use a socket wrench to remove the bolts that hold the bearing assembly in place. Then, use a pry bar to gently remove the assembly from the hub.

Step 4: Install the New Bearing

With the old bearing assembly removed, it’s time to install the new one. Start by cleaning the hub with a wire brush. Then, use a special tool to press the new bearing into place. Make sure to follow the manufacturer’s instructions carefully.

Step 5: Reassemble the Brake System

With the new bearing installed, it’s time to reassemble the brake system. Start by replacing the rotor and brake caliper. Make sure to tighten the bolts securely. Then, replace the wheel and lug nuts. Lower the car back to the ground and tighten the lug nuts to the manufacturer’s specifications.

Worn INFINITI wheel bearings can be a frustrating and potentially dangerous issue. If you notice any symptoms of worn wheel bearings, it’s important to have them checked by a mechanic as soon as possible. With the right tools and some basic mechanical knowledge, you can fix worn wheel bearings yourself. However, if you’re not comfortable working on your car’s suspension system, it’s best to take it to a mechanic who can diagnose and repair the issue. Remember, regular maintenance can go a long way in preventing wheel bearing issues, so make sure to follow your car’s maintenance schedule and take care of any issues as soon as they arise.